User`s manual

Standard Features AW00089316000
298 Basler ace GigE
For general information about auto functions, see Section 10.12 on page 282.
For information about Auto Function AOIs and how to set them, see Section 10.12.3 on page 284.
10.12.9 Using an Auto Function
To use an auto function, carry out the following steps:
1. Select an Auto Function AOI.
2. Assign the auto function you want to use to the selected Auto Function AOI.
3. Unassign the auto function you want to use from the other Auto Function AOI.
4. Set the position and size of the Auto Function AOI.
5. If necessary, set the lower and upper limits for the auto functions’s parameter value.
6. If necessary, set the target value.
7. Set the GrayValueAdjustmentDampingAbs parameter.
8. If necessary, set the auto function profile to define priorities between auto functions.
9. Enable the auto function by setting it to "once" or "continuous".
For more information about the individual settings, see the previous sections that describe the
individual auto functions.