User`s manual

AW00089316000 Standard Features
Basler ace GigE 271
Binning’s Effect on Stacked Zone Imaging (acA2000-50, acA2040-25 Only)
Using binning effectively reduces the resolution of the camera’s imaging sensor.
As a consequence, if binning is enabled, the positions and the sizes of the set stacked zones are
automatically adapted to the applied binning factors as follows: The stacked zone imaging
parameter values are divided by the corresponding binning factors (vertical and/or horizontal
binning factor).
If the stacked zone imaging parameter values are not evenly divisible by the corresponding binning
factor, the parameter values are automatically rounded down to the nearest whole number.
Example for zone 1:
For more information about the stacked zone imaging feature, see Section 10.6 on page 228.
Binning’s Effect on Decimation
If vertical binning is used, vertical decimation is automatically disabled, and vice versa, i.e. if vertical
decimation is used, vertical binning is disabled.
Horizontal binning works independently of the decimation feature.
Stacked Zone Imaging
Parameter
Without Binning With Binning by 2 With Binning by 3
Offset X
(valid for all zones)
10 5 3
Width
(valid for all zones)
16 8 5
Offset Y 6 3 2
Height 6 3 2
Table 24: Examples: Stacked Zone Imaging Settings for Zone 1