User`s manual

AW00089316000 Standard Features
Basler ace GigE 231
10.6.1 Setting Stacked Zone Imaging
Guidelines
When you are setting the stacked zones, you must follow these guidelines:
On all camera models:
 The sum of the Offset X setting plus the Width setting must not exceed the width of the
camera’s sensor. For example, on the acA2000-50gm, the sum of the Offset X setting plus the
Width setting must not exceed 2048.
 For any given zone, the sum of the Stacked Zone Imaging Zone Offset Y setting plus the
Stacked Zone Imaging Zone Height setting must not exceed the height of the camera’s sensor.
For example, on the acA2000-50gm, the sum of the Stacked Zone Imaging Zone Offset Y
setting plus the Stacked Zone Imaging Zone Height setting must not exceed 1088.
On monochrome camera models:
 The Stacked Zone Imaging Zone Offset Y and Stacked Zone Imaging Zone Height parameters
for any given zone can each be set in increments of 1.
 The Offset X and Width parameters can be set in increments of 1.
On color camera models:
 The Stacked Zone Imaging Zone Offset Y and Stacked Zone Imaging Zone Height parameters
for any given zone can each be set in increments of 2.
 The Offset X and Width parameters can be set in increments of 2.