User`s manual

Specifications, Requirements, and Precautions AW00089316000
12 Basler ace GigE
Specification acA2040-25gmNIR acA2500-14gm/gc
Sensor Size
(H x V pixels)
2048 x 2048 gm: 2592 x 1944
gc: 2590 x 1942
Sensor Type CMOSIS CMV4000-2E12M
Progressive scan CMOS
Global shutter
Aptina MT9P031
Progressive scan CMOS
Rolling shutter
Optical Size 1" 1/2.5"
Pixel Size 5.5 µm x 5.5 µm 2.2 µm x 2.2 µm
Max. Frame Rate
(at full resolution)
25 fps 14.6 fps
Mono/Color Mono (NIR) Mono or color (color models include a
Bayer pattern RGB filter on the sensor)
Data Output Type Fast Ethernet (100 Mbit/s) or Gigabit Ethernet (1000 Mbit/s)
Pixel Data Formats Mono and Mono (NIR) Models:
Mono 8
Mono 12
Mono 12 Packed
YUV 4:2:2 Packed
YUV 4:2:2 (YUYV) Packed
Color Models:
Mono 8
Bayer GR 8
Bayer GR 12
Bayer GR 12 Packed
YUV 4:2:2 Packed
YUV 4:2:2 (YUYV) Packed
Mono Models:
Mono 8
Mono 12
Mono 12 Packed
YUV 4:2:2 Packed
YUV 4:2:2 (YUYV) Packed
Color Models:
Mono 8
Bayer BG 8
Bayer BG 12
Bayer BG 12 Packed
YUV 4:2:2 Packed
YUV 4:2:2 (YUYV) Packed
ADC Bit Depth 12 bits
Synchronization Via external trigger signal, via the Ethernet connection, or free run
Exposure Control Via external trigger signal or programmable via the camera API
Camera Power
Requirements
PoE (Power over Ethernet 802.3af compliant) or
+12 VDC (±10%), < 1% ripple, supplied via the camera’s 6-pin Hirose connector
~ 2.9 W when using Power over Ethernet
~ 2.6 W @ 12 VDC when supplied via
the camera’s 6-pin connector
~ 2.5 W when using Power over Ethernet
~ 2.2 W @ 12 VDC when supplied via
the camera’s 6-pin connector
I/O Ports 1 opto-isolated input line and 1 opto-isolated output line
Lens Adapter C-mount C-mount; CS-mount
Size (L x W x H) 42.0 mm x 29 mm x 29 mm (without lens adapter or connectors)
60.3 mm x 29 mm x 29 mm (with lens adapter and connectors)
Table 6: General Specifications