User`s manual

Physical Interface AW00098504000

26 Basler ace Camera Link

5.2 Camera Connector Pin Assignments

and Numbering

5.2.1 4-Pin Receptacle

The 4-pin receptacle is used to supply power to the camera and to access the camera’s GPIO line.

The pin assignments and pin numbering for the receptacle are as shown in Table 1.

Pin Designation

1 +12 VDC Camera Power (+12 VDC ± 10%)

2 General Purpose I/O (GPIO)

3 Camera Power Ground

4 GPIO Ground

Table 1: Pin Assignments and Numbering for the 4-pin Receptacle