User`s manual

AW00098504000 Revision History
Basler ace Camera Link 229
Revision History
Doc. ID Number Date Changes
AW00098501000 16 Feb 2011 Preliminary release of this document. Applies to prototype cameras only.
AW00098502000 1 Apr 2011 Second preliminary release.
Added information for the acA2000-340km/kc, acA2040-70km/kc, and
acA2040-180km/kc models.
Added information for the new stacked zone imaging, sequencer, and error
detection features.
Applies to prototype cameras only.
AW00098503000 6 Jun 2011 Third preliminary release. Applies to prototype cameras only.
Updated all specifications and feature descriptions.
AW00098504000 7 Feb 2013 Fourth release: Information relating to acA NIR cameras describes the
cameras in their prototype stage.
Indicated Basler AG as bearer of the copyright on the back of the front
page.
Updated e-mail addresses for Basler technical support.
Removed the following cameras from the manual: acA2000-140km/kc,
acA2040-70km/kc.
Included the following cameras into the manual: acA2000-340kmNIR,
acA2040-180kmNIR.
Corrected the focal length distance in Section 1.4.1 on page 7.
Added LZ4 licensing information in Section 1.5.1 on page 9.
Modified the statement of camera power in Table 2 on page 27 and
replaced it in Table 3 on page 28.
Added the full config. entries in Table 5.2.2 on page 27.
Removed abolute max. voltages from Table 4 on page 36, Table 5 on
page 36, and Section 5.7.2.2 on page 37 (inputs) and from Table 6 on
page 41 and Section 5.7.4.2 on page 41 (output).
Replaced absolute max. input voltage in Figure 11 on page 38 by the
recommended voltage range for standard power and I/O cable.