User`s manual

AW00098504000 Features
Basler ace Camera Link 179
10.7 Mirror Imaging
The camera’s reverse X and reverse Y functions let you flip the captured images horizontally and/
or vertically before they are transmitted from the camera.
Note that the reverse X and reverse Y functions may both be enabled at the same time if so desired.
10.7.1 Reverse X
The reverse X feature is a horizontal mirror image feature. When the reverse X feature is enabled,
the pixel values for each line in a captured image will be swapped end-for-end about the line’s cen-
ter. This means that for each line, the value of the first pixel in the line will be swapped with the value
of the last pixel, the value of the second pixel in the line will be swapped with the value of the next-
to-last pixel, and so on.
Figure 53 shows a normal image on the left and an image captured with reverse X enabled on the
right.
Fig. 53: Reverse X Mirror Imaging
Normal Image Reverse X Mirror Image