User`s manual

AW00098504000 Specifications, Requirements, and Precautions
Basler ace Camera Link 3
Specification acA2040-180km acA2040-180kmNIR aca2040-180kc
Sensor Resolution
( H x V pixels)
2048 x 2048 2046 x 2046
Sensor Type CMOSIS CMV 4000
Progressive scan
CMOS
CMOSIS CMV4000--2E12M
Progressive scan CMOS
CMOSIS CMV 4000
Progressive scan
CMOS
Optical Size 1"
Pixel Size 5.5 µm x 5.5 µm
Max Frame Rate
(at full resolution and
10 bit sensor depth)
180 fps
Mono/Color Mono Mono (NIR) Color
Sensor Bit Depth 12 bits or 10 bits (selectable)
Data Output Type Camera Link base or medium configuration
Camera Link Connectors Two 26-pin SDR connectors (also known as Mini Camera Link connectors)
Camera Link Clock Speed 32.5 MHz, 48 MHz, 65 Mhz, or 82 MHz (selectable)
Camera Link Tap Geometry 1X2-1Y, 1X3-1Y, 1X4-1Y, 1X6-1Y, 1X8-1Y or 1X10-1Y
Pixel Data Formats Mono 8,
Mono10, or
Mono 12
Bayer GB 12,
Bayer GB 10, or Bayer
GB 8
Synchronization Via external trigger signal, software trigger signal, or free run
Exposure Control Trigger width or timed
Power Requirements PoCL (Power over Camera Link compliant)
or
+12 VDC (± 10%), < 1% ripple, supplied via the camera’s 4-pin connector
Max Power Consumption 3.0 W @ 12 VDC
I/O Lines 1 GPIO (can be set to operate as an input or an output)
Lens Adapter C-mount
Size
(L x W x H)
43.5 mm x 29.0 mm x 29.0 mm (without lens adapter or connectors)
58.9 mm x 29.0 mm x 29.0 mm (with lens adapter and connectors)
Weight < 90 g (typical)
Conformity CE, FCC, GenICam, RoHS, Camera Link, IP30
Driver Basler pylon (release 2.3 or newer)
API for Configuration Register-based API for C or VB6
Basler pylon C++ API
Table 2: General Specifications