User`s manual

AW00098504000 Image Acquisition Control
Basler ace Camera Link 95
To set the exposure time via direct register access:
 Set the value of the Exposure Time Raw register.
A value in a raw register is simply an integer value with no units. To determine what the actual
exposure time will be, you must multiply the value in the raw register by the camera’s time base.
The time base on ace cameras is 1 µs.
For example, if you set the Exposure Time Raw register to 1000, the exposure time would be
1000 µs (1000 x 1 µs = 1000 µs).
For more information about direct register access, see Section 3.2 on page 21.