User`s manual

Configuring the Camera
BASLER A620
f 4-35
DRAFT
Register Name: Value Setting
Offset from Base Address: 0x07C
Field Bit Description
Presence Inq
0 Indicates whether the fields in this register are valid.
0 = not valid 1 = valid
The fields in this register are valid on the A620f.
The Presence Inq field is read only.
Setting 1
1 On the A620f, this field is not relevant and should be ignored.
(On the A620f, updates to the register values monitored by this field
are performed automatically.)
---
2 ... 7 Reserved
Error Flag 1 8 Indicates whether the combination of the values in the ISO Speed reg-
ister and in the Format 7 Mode 0 Image Position, Image Size and Color
Coding ID registers and is acceptable.
0 = acceptable
1 = not acceptable and no image capture can be started
Error Flag 2
9 Indicates whether the value in the Bytes per Packet register is accept-
able.
0 = acceptable
1 = not acceptable and no image capture can be started
This field is updated whenever a value is written in the Bytes per
Packet register.
---
10 ... 31 Reserved