User`s manual

Configuring the Camera

BASLER A620

f 4-21

DRAFT

Offset from Base Address: 0x614

Field Bit Description

Continuous Shot

0 When the camera is set for video Format 0, Format 1, Format 2 or For-

mat 7, this field controls the “continuous shot” video transmission

mode.

1 = start “continuous shot” transmission

0 = stop “continuous shot” transmission

Default = 0

---

1 ... 31 Reserved

Offset from Base Address: 0x61C

Field Bit Description

One Shot 0 When the camera is set for video Format 0, Format 1, Format 2 or For-

mat 7, this field controls the “one shot” video transmission mode.

1 = transmit one frame of video data

(Field is self cleared after transmission.)

Default = 0

Multi Shot

1 Multi shot is not supported on the A620f.

--- 2 ... 15 Reserved

Count Number 16 ... 31 The count number for multi shot is not supported on the A620f.

Offset from Base Address: 0x628

Field Bit Description

Status 0 Used only when the camera is set for a standard format (not Format 7).

This field will be updated each time the video format, mode, frame rate

or ISO speed setting is changed. The value in this field indicates

whether the current combination of video format, mode, frame rate and

ISO speed settings is acceptable to the camera.

0 = the combination is OK, image capture can be started

1 = the combination is not OK, image capture can not be started

This field is read only.

---

1 ... 31 Reserved