User`s manual

Basic Operation & Standard Features
BASLER A620
f 3-33
DRAFT
3.13 Error Flags
A620f cameras support the following error flags:
• Error flags that indicate whether the current trigger, shutter, gain and brightness settings are
outside the specified range of allowed values. These error flags are set in the Trigger, Shut-
ter, Gain and Brightness fields of the Feature Control Error Status High register (see page 4-
27).
• An error flag that indicates whether the current combination of the following settings is
acceptable to the camera:
• Video format
•Mode
• Frame rate
• ISO speed
This error flag is available for Format 0, Format 1 and Format 2 only and is set in the Status
field of the Vmode Error Status register (see page 4-21).
• An error flag that indicates whether the current combination of the following settings is
acceptable to the camera:
• Image position
• Image size
• Color Coding ID
• ISO speed
This error flag is available for Format 7 only.
If you are operating the camera in Format 7 Mode_0, the flag is set in the Error Flag 1 field of
the Value Setting register for Format 7 Mode_0 (see page 4-35).
• An error flag that indicates whether the current bytes per packet setting is acceptable to the
camera.
This error flag is available for Format 7 only.
If you are operating the camera in Format 7 Mode_0, the flag is set in the Error Flag 2 field of
the Value Setting register for Format 7 Mode_0 (see page 4-35).
L
The error flag registers are defined in version 1.31 of the IIDC specification.