User`s manual

Basic Operation & Standard Features

3-28 BASLER A620

DRAFT

If you start an image exposure and the strobe signal for the previously captured image

is still running, the running strobe signal ends immediately and the next delay and du-

ration begin.

The Strobe Control Output Signal registers are defined in version 1.31 of the IIDC

specification.

Because the strobe control output signal feature is so new, the Basler BCAM 1394

Driver does not yet include a method call to access this feature. As a work-around, you

can use the techniques described in the tutorial for the Basler Smart Features Frame-

work Software to directly read from or write to the strobe control output signal registers.

The Smart Features Framework Software is available on the Basler web site. To down-

load the software go to:

http://www.baslerweb.com/popups/popup_en_1825.php