User`s manual

Introduction
1-2 BASLER A620
f
DRAFT
1.2 Camera Models
Currently only one model of the camera is available and this model is designated as the A622f.
The A622
f is only available in monochrome. Throughout this User’s Manual, the camera will be
referred to as the A620
f (this is the camera family designation).
1.3 Performance Specifications
Specification A622f
Sensor Type IBIS5A-1300 - 2/3 inch, CMOS, Global Shutter
Pixels
1280 (H) x 1024 (V)
Pixel Size 6.7 µm (H) x 6.7 µm (V)
Max. Frame Rate
(at full resolution)
25.0 fps in 8 bit output modes
12.5 fps in 16 bit output modes
(The exposure time setting significantly affects the frame rate.
See Section 3.3.2 for details.)
Video Output Formats
Mono 8 (8 bits/pixel)
Mono 16 (16 bits/pixel - 10 bits are effective)
Pseudo YUV 4:2:2 (16 bits/pix avg.)*
* See Section 3.12.1 for more details.
Gain and Brightness
Programmable via the IEEE 1394 bus
Exposure Time Control Programmable via the IEEE 1394 bus
Synchronization External via External Trigger signal
Power Requirements +8.0 to +36.0 VDC (+12 VDC nominal), < 1% ripple
2.3 W max @ 12 VDC (typical)
supplied via 1394 cable
I/O Electrical
Characteristics
Inputs: opto-isolated, 5 VDC nominal, 10 mA nominal
Outputs: opto-isolated, 2 to 48 VDC maximum forward voltage, 100 mA max
collector current
See Sections 2.5.1 and 2.5.2 for more details.
Max. Cable Lengths
1394: 4.5 meters
I/O: 10 meters
See Section 2.2 for more details.
Lens Adapter
C-mount
Housing Size
(L x W x H)
Not including lens adapter: 59.0 mm x 44 mm x 29 mm
Including C-mount adapter: 67.3 mm x 44 mm x 29 mm
Weight
< 100 g (typical)
Conformity CE, FCC
Table 1-1: A620f Performance Specifications