User`s manual

Configuring the Camera
BASLER A600f 4-21
DRAFT
4.5 Advanced Features Registers
The base address for the advanced features registers is:
Bus_ID, Node_ID, FFFF F2F0 0000
This address is contained in the Advanced_Feature_Inq register of the “Inquiry register for feature
presence” section.
The offset field in each of the tables is the byte offset from the above base address.
4.5.1 Advanced Features Access Control Register
Advanced Features Access Control Register
4.5.2 Advanced Features Inquiry Registers
Inquiry Register for Advanced Features (High)
L
The functionally of the advanced features control and status registers has been
made part of Basler’s Smart Features Framework (SFF). We strongly recommend
that you use the SFF registers (see Section 5) rather than the advanced features
registers.
To ensure backward compatibility, the existing advanced features registers de-
scribed below will continue to be supported, but their functionality will not be ex-
tended in the future.
Offset Name Notes
0000h ACCESS_CONTROL_REGISTER See DCAM Spec. V1.30 page 26.
Offset Name Field Bit Description
0008h ADV_INQ_HI Presence [0] Presence of this feature
Test Image [1] Presence of test images
Shading [2] Presence of shading correction
--- [3] Reserved
Extd. Versions [4] Presence of extended versions
Firmware Upload [5] Presence of firmware upload
capability
--- [6..31] Reserved