User`s manual

Configuring the Camera
4-14
BASLER A600f
DRAFT
Control and Status Registers for Format_7, Mode_1
Format_7, Mode_1 is available on A600fc color cameras only. The base address for each
Format_7, Mode_1 camera control register is:
Bus_ID, Node_ID, FFFF F1F0 0100
The offset field in each of the tables is the byte offset from the above base address.
* This Color_Coding_Inq register is defined in version 1.31 of the IIDC specification.
Offset Name Notes
000h Max_Image_Size_Inq Hmax = 656, Vmax = 490
The VGA sub-image is positioned in the center of
the full size image.
004h
Unit_Size_Inq Hunit = 2, Vunit = 2
008h
Image_Position Default = (0, 0)
00Ch
Image_Size Default = (Hmax, Vmax)
010h
Color_Coding_ID A600fc default = Mono 8 (ID = 0)
014h
Color_Coding_Inq The A600fc supports the following color codes in
this mode:
• Mono 8 (ID = 0)
024h *
Color_Coding_Inq Field is not used in this mode.
034h
PixelL_Number_Inq The value of this register depends on the following
registers:
• Image_Size
038h
Total_Bytes_HI_Inq The value of this register depends on the following
registers:
• Image_Size
• Color_Coding_ID
The value covers the following data:
• Image data
• Padding bytes
• Data added by any enabled smart features
03Ch
Total_Bytes_Lo_Inq See Total_Bytes_Hi_Inq register
040h
Packet_Para_Inq UnitBytePerPacket = 4
MaxBytePerPacket depends on:
• Image_Size
• Color_Coding_ID