User`s manual

Configuring the Camera
4-12
BASLER A600f
DRAFT
* When you lower the bytes per packet setting, the number of bytes needed to transmit a frame
(the packets per frame) will increase. Due to limitations in the DCAM structure, a maximum of
4095 packets per frame is allowed. If you set the bytes per packet too low, the number of
packets per frame will exceed the 4095 packet limit and the camera will not transmit frames
properly.
Offset Name Notes
034h Pixel_Number_Inq The value of this register depends on the following
registers:
• Image_Size
038h
Total_ By tes _Hi_Inq The value of this register depends on the following
registers:
• Image_Size
• Color_Coding_ID
The value Includes the following data:
• Image data
• Padding bytes
• Data added by any enabled smart features
03Ch
Toyal_Bytes_Lo_Inq See Total_Bytes_Hi_Inq register
040h
Packet_Para_Inq UnitBytePerPacket = 4
MaxBytePerPacket depends on:
• Image_Size
• Color_Coding_ID
044h
Byte_Per_Packet BytePerPacket = set by user *
RecBytePerPacket = 4092 (0xFFC)
048h
Packet_Per_Frame_Inq The value of this register depends on the following
registers:
• Image_Size
• Color_Coding_ID
• Byte_Per_Packet
The value Includes the following data:
• Image data
• Padding bytes
• Data added by any enabled smart features
04Ch
Unit_Position_Inq A600f: Hposunit = 1, Vposunit = 1
A600fc: Hposunit = 2, Vposunit = 2