User`s manual

Configuring the Camera
BASLER A600f 4-11
DRAFT
Control and Status Registers for Format_7, Mode_0
Format_7, Mode_0 is available on all A600f monochrome and A600fc color cameras. The base
address for each Format_7, Mode_0 camera control register is:
Bus_ID, Node_ID, FFFF F1F0 0000
The offset field in each of the tables is the byte offset from the above base address.
* The Raw 8 Color_Coding_ID, Raw 16 Color_Coding_ID, and Color_Coding_Inq register are
defined in version 1.31 of the IIDC specification.
Offset Name Notes
000h Max_Image_Size_Inq Hmax = 656
Vmax = 491(mono cameras), 490 (color cameras)
The VGA sub-image is positioned in the center of
the full size image.
004h
Unit_Size_Inq A600f: Hunit = 1, Vunit = 1
A600fc: Hunit = 2, Vunit = 2
008h
Image_Position Default = (0, 0)
00Ch
Image_Size Default = (Hmax, Vmax)
010h
Color_Coding_ID A600f default = Mono 8 (ID = 0)
A600fc default = YUV 4:2:2 (ID = 2)
014h
Color_Coding_Inq The A600f supports the following color codes in this
mode:
• Mono 8 (ID = 0)
• Mono 16 (ID = 5)
The A600fc supports the following color codes in
this mode:
• Mono 8 (ID = 0)
• Raw 8 * (ID = 9)
• Raw 16 * (ID = 10)
• YUV 4:2:2 (ID = 2)
024h *
Color_Coding_Inq Field is not used in this mode.