User`s manual

Basic Operation & Standard Features
BASLER A600f 3-17
DRAFT
3.5.2 Setting the Brightness
The camera’s brightness is changed by setting the value field in the Brightness control register
(see page 4-9). The setting can range on a decimal scale from 0 to 1023 (0x000 to 0x3FF). The
default is typically 725 (0x2D5) by may vary slightly from camera to camera. Settings below the
default decrease the brightness and settings above the default increase the brightness.
The effect of a change in the brightness setting varies depending on the gain setting. With the gain
set to 0, changing the brightness setting by 4 results in a change of 1 in the digital values output
by the camera. With the gain set to 255, changing the brightness setting by 1 results in a change
of 1 in the digital values output by the camera.