User`s manual

Revision History
BASLER A600f i
DRAFT
Revision History
Doc. ID Number Date Changes
DA00056101 7 November 2002 Initial release of the manual. Applies to prototype cameras only.
DA00056102
23 April 2003 Initial release of the manual for series production cameras.
DA00056103
24 October 2003 Added information for the color version of the camera.
DA00056104
4 February 2004 Updated the version and specification tables in Sections 1.3 and 1.2
to include the new A601f - HDR camera model.
Revised the description of adjusting the AOI in color camera that ap-
pears in the note box on page 3-19.
Added Section 3.6.1 that describes changing the AOI on-the-fly.
Added Section 3.7.2 that describes the Color Filter ID field.
Updated the available standard format lists in Sections 3.12.1 and
3.13.1.
Added a section that describes the new Format_7, Mode_2.
Updated the register descriptions in Section 4.4 to include new stan-
dard frame rates, to include new modes for the A601-HDR camera,
to add information about some newly implemented registers, and to
reflect changes to some register offsets.
Added Section 5 that describes the new smart features and the
smart features framework.
Added a section that describes the new A601-HDR camera.
DA00056105
9 March 2004 Added Section 1.1 describing document applicability.
Removed the sections describing the A600f-HDR and Format 7,
Mode 2. The A600f-HDR information is now in a separate manual.
The following revisions were made as a result of changes to the
camera firmware (firmware ID 21):
Updated Sections 2.4, 3.2.5, 3.3, and 3.4 to reflect the new input
and output port configuration options.
Added Section 3.2.4 describing the new software trigger feature.
Added Section 3.9 describing the new mirror image feature.
Added Sections 3.10 and 3.11 describing the new Strobe Control
Output Signal and Parallel IO Control features.
Updated the register descriptions in Section 4.4 to reflect new and
revised features.
Added Sections 5.7.9 and 5.7.10 to describe the new Trigger Flag/
Counter and Output Port Configuration features.
DA00056106
22 March 2004 Corrected errors in the description of the Control and Status Regis-
ters for PIO Control on page 4-18.
Corrected errors in the description of the Control and Status Regis-
ters for the Output Port Configuration smart feature on page 5-29.
Expanded the description of the Gain and Brightness functions in
Section 3.5