User`s manual

Configuring the Camera
4-16 Basler A500k
PRELIMINARY
4.2.4.8 DSNU Constancy and Shutterline Correction Enable (A503k Only)
Purpose: To enable/disable the DSNU constancy feature and/or the shutterline correction feature. See
section 3.7 for more information on the DSNU constancy feature and section 3.8 for more
information on shutterline correction.
Type: This is a read or write command.
Read Command: Cmd-ID R/W-Flag Data Length Data
0x91 1 1 -
Response: Cmd-ID R/W-Flag Data Length Data
0x91 0 1 1 Byte
Write Command: Cmd-ID R/W-Flag Data Length Data
0x91 0 1 1 Byte
Response: None
Data Format: Byte 1 An ID that specifies the features.
Bit 0 Switches the DSNU constancy feature
Bit 4 Switches the shutterline correction feature
(see the table below)
ID
DSNU Constancy and Shutterline Correction Features
0x00
DSNU constancy OFF, shutterline correction OFF
0x01
DSNU constancy ON, shutterline correction OFF
0x10
DSNU constancy OFF, shutterline correction ON
0x11
DSNU constancy ON, shutterline correction ON