User`s manual

Physical Interface
Basler ace Camera Link 25
5.2.2 26-Pin SDR Connectors
Two 26-pin, 0.03” pin spacing, Shrunk Delta Ribbon (SDR) female connectors are used to transmit
video data, control signals, and configuration commands. The pin assignments and pin numbering
for the base Camera Link SDR connector are as shown in Table 2 for the medium Camera Link SDR
connector are as shown in Table 3 on page 26.
* Pins 1 and 26 are tied together in the camera.
** Pins 13 and 14 are tied together in the camera.
Pin Number Signal Name Direction Level Function
1, 26 * Cam Pow. In +12 VDC Camera power, +12 VDC (±10%, < 1% ripple)
13, 14 ** Power Ret. Return Camera power return (Gnd)
2 X0- Output Camera Link
LVDS
Data from transmitter circuit X
15 X0+
3 X1- Output Camera Link
LVDS
Data from transmitter circuit X
16 X1+
4 X2- Output Camera Link
LVDS
Data from transmitter circuit X
17 X2+
6 X3- Output Camera Link
LVDS
Data from transmitter circuit X
19 X3+
5 XClk- Output Camera Link
LVDS
Pixel clock from transmitter circuit X
18 XClk+
7 SerTC+ Input RS-644
LVDS
Serial communication data receive
(SerTC = "serial to camera")
20 SerTC-
8 SerTFG- Output RS-644
LVDS
Serial communication data transmit
(SerTFG = "serial to frame grabber")
21 SerTFG+
9 CC1- Input RS-644
LVDS
Configurable
22 CC1+
10 CC2+ Input RS-644
LVDS
Configurable
23 CC2-
11 CC3- Input RS-644
LVDS
Configurable
24 CC3+
12 None None None None
25 None-
Table 2: Pin Assignments and Numbering for the Base Configuration 26-pin SDR Connector
1
26
14
13