User`s manual

Sensor Bit Depth, Pixel Formats, Tap Geometries, and Clock Speeds
Basler ace Camera Link 145
The tap geometries available vary by model as shown in Table 11.
For more information about the camera’s maximum allowed frame rate, see Section 7.8 on
page 115.
This section describes the basics of Camera Link tap geometry. For more complete tap geometry
details, refer to the Basler document named Ace Camera Link Information for Frame Grabber
Designers (AW000990xx000) You can obtain the document from the Downloads section of the
Basler website:
www.baslerweb.com
Tap Geometry
Setting
Camera Model
acA2000-140km/kc acA2000-340km/kc acA2040-70km/kc acA2040-180km/kc
1X2-1Y
••••
1X3-1Y
••••
1X4-1Y
••••
1X6-1Y
••
1X8-1Y
••
1X10-1Y
••
Table 11: Available Tap Geometries by Model (• = geometry available)