User`s manual

Specifications, Requirements, and Precautions
Basler ace Camera Link 3
Specification acA2040-70km acA2040-70kc acA2040-180km aca2040-180kc
Sensor Resolution
( H x V pixels)
2048 x 2048 2046 x 2046 2048 x 2048 2046 x 2046
Sensor Type CMOSIS CMV 4000 Progressive scan CMOS
Optical Size 1"
Pixel Size 5.5 µm x 5.5 µm
Max Frame Rate
(at full resolution and
10 bit sensor depth)
70 fps 180 fps
Mono/Color Mono Color Mono Color
Sensor Bit Depth 12 bits or 10 bits (selectable)
Data Output Type Camera Link base or medium
configuration
Camera Link base, medium, or full
configuration
Camera Link Connectors Two 26-pin SDR connectors (also known as Mini Camera Link connectors)
Camera Link Clock Speed 32.5 MHz, 48 MHz, 65 Mhz, or 82 MHz (selectable)
Camera Link Tap Geometry 1X2-1Y, 1X3-1Y, or 1X4-1Y 1X2-1Y, 1X3-1Y, 1X4-1Y, 1X6-1Y, 1X8-
1Y or 1X10-1Y
Pixel Data Formats Mono 12,
Mono10, or Mono
8
Bayer GB 12,
Bayer GB 10, or
Bayer GB 8
Mono 12,
Mono10, or Mono
8
Bayer GB 12,
Bayer GB 10, or
Bayer GB 8
Synchronization Via external trigger signal, software trigger signal, or free run
Exposure Control Trigger width or timed
Power Requirements PoCL (Power over Camera Link compliant)
or
+12 VDC (± 10%), < 1% ripple, supplied via the camera’s 4-pin connector
Max Power Consumption 3.0 W @ 12 VDC
I/O Lines 1 GPIO (can be set to operate as an input or an output)
Lens Adapter C-mount
Size
(L x W x H)
43.5 mm x 29.0 mm x 29.0 mm (without lens adapter or connectors)
58.9 mm x 29.0 mm x 29.0 mm (with lens adapter and connectors)
Weight < 90 g (typical)
Conformity CE, FCC, GenICam, RoHS, Camera Link, IP30
Driver Basler pylon (release 2.3 or newer)
API for Configuration Register-based API for C or VB6
Basler pylon C++ API
Table 2: General Specifications