User`s manual

Specifications, Requirements, and Precautions
2 Basler ace Camera Link
1.2 General Specifications
Specification acA2000-140km acA2000-140kc acA2000-340km aca2000-340kc
Sensor Resolution
( H x V pixels)
2048 x 1088 2046 x 1086 2048 x 1088 2046 x 1086
Sensor Type CMOSIS CMV 2000 Progressive scan CMOS
Optical Size 2/3"
Pixel Size 5.5 µm x 5.5 µm
Max Frame Rate
(at full resolution and
10 bit sensor depth)
140 fps 340 fps
Mono/Color Mono Color Mono Color
Sensor Bit Depth 12 bits or 10 bits (selectable)
Data Output Type Camera Link base or medium
configuration
Camera Link base, mdeium, or full
configuration
Camera Link Connectors Two 26-pin SDR connectors (also known as Mini Camera Link connectors)
Camera Link Clock Speed 32.5 MHz, 48 MHz, 65 Mhz, or 82 MHz (selectable)
Camera Link Tap Geometry 1X2-1Y, 1X3-1Y, or 1X4-1Y 1X2-1Y, 1X3-1Y, 1X4-1Y, 1X6-1Y, 1X8-
1Y or 1X10-1Y
Pixel Data Formats Mono 12,
Mono10, or
Mono 8
Bayer GB 12,
Bayer GB 10, or
Bayer GB 8
Mono 12,
Mono10, or
Mono 8
Bayer GB 12,
Bayer GB 10, or
Bayer GB 8
Synchronization Via external trigger signal, software trigger signal, or free run
Exposure Control Trigger width or timed
Power Requirements PoCL (Power over Camera Link compliant)
or
+12 VDC (± 10%), < 1% ripple, supplied via the camera’s 4-pin connector
Max Power Consumption 3.0 W @ 12 VDC
I/O Lines 1 GPIO (can be set to operate as an input or an output)
Lens Adapter C-mount
Size
(L x W x H)
43.5 mm x 29.0 mm x 29.0 mm (without lens adapter or connectors)
58.9 mm x 29.0 mm x 29.0 mm (with lens adapter and connectors)
Weight < 90 g (typical)
Conformity CE, FCC, GenICam, RoHS, Camera Link, IP30
Driver Basler pylon (release 2.3 or newer)
API for Configuration Register-based API for C or VB6
Basler pylon C++ API
Table 1: General Specifications