User`s manual

Physical Interface
Basler aviator Camera Link 31
2.9.3 Response Times
Response times for the output lines on the camera are as shown in Figure 13.
Time Delay Rise (TDR) = 1.5 µs (typical)
Rise Time (RT) = 1.0 - 2.0 µs (typical)
Time Delay Fall (TDF) = 40 µs (typical)
Fall Time (FT) = 5 - 10 µs (typical)
The response times for the output lines on your camera will typically fall into the
ranges specified above. The exact response time for your specific application will
depend on the external resistor and the applied voltage you use.
Camera
Output
Signal
Output
Line
Voltage
Time
TDR
RT
TDF
FT
90%
90%
Fig. 13: Output Line Response Times