User`s manual

Physical Interface
28 Basler aviator Camera Link
2.8.3 Selecting an Input Line As the Source Signal for
a Camera Function
You can select input line 1 or input line 2 to act as the source signal for the following camera
functions:
 the acquisition start trigger
 the frame start trigger
Note that when an input line has been selected as the source signal for a camera function, you must
apply an electrical signal to the input line that is appropriately timed for the function.
For more information about selecting input line 1 or input line 2 as the source signal for an external
acquisition start trigger function, see Section 5.2 on page 53.
For more information about selecting input line 1 or input line 2 as the source signal for an external
frame start trigger function, see Section 5.3 on page 61.