User`s manual

Index
184 Basler aviator Camera Link
exposure start delay.................................85
exposure time
controlling with an external trigger
signal..................................................70
maximum possible .............................75
minimum allowed ...............................75
F
factory setup ..........................................170
auto functions factory setup .............170
high gain factory setup.....................170
standard factory setup .....................170
firmware version parameter ...................162
four tap digitization...................................38
four tap sensor readout............................37
frame rate
and AOI size ......................................90
controlling with an external trigger
signal..................................................70
increasing the max allowed................91
maximum allowed ..............................90
frame readout time.............................85
, 89
frame start trigger...................34
, 49, 50, 61
frame start trigger mode parameter .........61
frame transmission time.....................85
, 89
free run.....................................................77
functional description ...............................37
G
gain
in four tap digitization mode.............105
in one tap digitization mode .............107
gain auto ................................................124
gamma correction ..................................159
H
hardware trigger
acquisition start............................59
, 70
heat dissipation ........................................11
height, AOI .............................................141
high gain factory setup...........................170
horizontal binning...................................146
humidity....................................................11
I
I/O line schematic.................................... 25
image property
target value...................................... 116
imaging sensor temperature.................. 164
increasing the max allowed frame
rate .......................................................... 91
input lines
electrical characteristics .................... 27
voltage requirements......................... 26
IP30 ........................................................... 6
IR cut filter ..................................... 5
, 8, 113
L
LED.......................................................... 24
lens adapter........................................... 2
, 3
lens thread length...................................... 8
LUT (luminance lookup table)................ 155
M
maximum allowed frame rate .................. 90
maximum lens thread length ..................... 8
mechanical drawings ................................. 6
mirror imaging........................................ 150
mode of operation (of auto function)
continuous....................................... 117
once................................................. 117
models....................................................... 1
mounting holes .......................................... 6
O
one tap digitization................................... 41
one tap sensor readout............................ 41
optical size, sensor................................ 2
, 3
output line
electrical characteristics .................... 29
response time.................................... 31
source signal ..................................... 32
voltage requirements......................... 29
over temperature condition.................... 165
over triggering.......................................... 70