User`s manual

Configuring the Camera
4-36 BASLER A102
f
DRAFT
* If a bit is set to 0, the camera does not support this color coding ID in Format 7 Mode 1.
If a bit is set to 1, the camera supports this color coding ID in Format 7 Mode 1.
Register Name: Color Coding Inquiry
Offset from Base Address: 0x014
Field Name: Bit Description A102fc
Value *
Mono 8
0 8 bit raw value, non-compressed (ID = 0)
This is a non-standard definition. When set to this color cod-
ing ID in Format 7 Mode 1, an A102fc will output the raw value
for each pixel. The pixel data is not processed in any way to
account for the color filter on the sensor. (This type of output
is sometimes called “Bayer 8.”)
1
4:1:1 YUV8
1 4:4:1 YUV, 8 bits/component, non-compressed
(ID = 1)
0
4:2:2 YUV 8
2 4:2:2 YUV, 8 bits/component, non-compressed
(ID = 2)
0
4:4:4 YUV 8
3 4:4:4 YUV, 8 bits/component , non-compressed
(ID = 3)
0
RGB 8
4 RGB, 8 bits/component, non-compressed
(ID = 4)
0
Mono 16
5 Y only, 16 bits, non-compressed
(unsigned integer)
(ID = 5)
0
RGB 16
6 RGB, 16 bits/component, non-compressed
(unsigned integer)
(ID = 6)
0
Signed Mono 16
7 Y only, 16 bits, non-compressed
(signed integer)
(ID = 7)
0
Signed RGB 16
8 RGB, 16 bits/component, non-compressed
(signed integer)
(ID = 8)
0
Raw 8
9 8 bit, raw data output from a color filter sensor
(ID = 9)
0
Raw 16
10 16 bit, raw data output from a color filter sensor
(ID = 10)
0
---
11 ... 31 Reserved ---