User`s manual

Configuring the Camera
BASLER A102f 4-3
DRAFT
4.4 Implemented Standard Registers
A list of all standard registers implemented in A102f appears below.
The base address for all camera control registers is:
Bus_ID, Node_ID, FFFF F0F0 0000
This address is contained in the configuration ROM in the camera unit directory. The offset field
in each of the tables is the byte offset from the above base address.
4.4.1 Inquiry Registers
Camera Initialize Register
Inquiry Register for Video Format
Inquiry Registers for Video Mode
Offset Name Notes
000h Initialize Camera will reset itself, break any state lock, and
re-initialize itself to factory settings.
Offset Name Notes
100h V_Format_Inq The A102f and A102fc support:
• Format_2
• Format_7.
Offset Name Notes
188h V_Mode_Inq_2
(Format 2)
In format_2, the A102f supports:
• Mode_2 (1280 x 960, mono, 8 bits/pixel)
• Mode_6 (1280 x 960, mono, 16 bits/pixel)
In format_2, the A102fc supports:
• Mode_0 (1280 x 960, YUV 4:2:2, 16 bits/pixel avg.)
• Mode_2 (1280 x 960, mono, 8 bits/pixel)
19Ch
V_Mode_Inq_7
(Format 7)
In format_7, the A102f supports:
• Mode_0 (1392 x 1040)
In format_7, the A102fc supports:
• Mode_0 (1388 x 1038)
• Mode_1 (1388 x 1038)