User`s manual

Mechanical Considerations
BASLER A102f 6-3
DRAFT
6.2 Positioning Accuracy of the Sensor Chip
The positioning accuracy of the sensor chip in the horizontal and vertical directions is as shown
in Figure 6-2. Rotational accuracy is also shown in the figure. Reference position is the center of
the camera housing.
Since the translatory and the rotational positioning tolerances depend on each other, the worst
case of maximum rotational and horizontal/vertical mis-positioning can not occur at the same time.
Figure 6-2: Positioning Accuracy of the Sensor Chip
Tolerances are typical
±0.3 mm
Drawings are not to scale