User`s manual

Configuring the Camera
BASLER A101f 4-3
DRAFT
4.4 Implemented Registers
A list of all registers implemented in the A101f appears below.
The base address for all camera control registers is:
Bus_ID, Node_ID, FFFF F0F0 0000
This address is contained in the configuration ROM in the camera unit directory. The offset field
in each of the tables is the byte offset from the above base address.
Camera Initialize Register
Inquiry Register for Video Format
Inquiry Registers for Video Mode
Offset Name Notes
000h INITIALIZE
Offset Name Notes
100h V_FORMAT_INQ
Offset Name Notes
180h V_MODE_INQ_0
(Format 0)
184h V_MODE_INQ_1
(Format 1)
188h V_MODE_INQ_2
(Format 2)
18Ch ... 194h Reserved
198h V_MODE_INQ_6
(Format 6)
19Ch V_MODE_INQ_7
(Format 7)