User`s manual

Camera Interface
2-2 BASLER A101f
DRAFT
2.1.2 Pin Assignments
The IEEE 1394 socket is used to supply power to the camera and to interface video data and
control signals. The pin assignments for the socket are shown in Table 2-1.
The 9-pin micro-D plug is used to interface the external trigger, integrate enabled, and trigger
ready signals. The pin assignments for the plug are shown in Table 2-2
Figure 2-2: A101
f Pin Numbering
Pin Signal Pin Signal
1
+12 VDC 4 TPB+
2
DC Gnd 5 TPA-
3
TPB- 6 TPA+
Table 2-1: Pin Assignments for the IEEE 1394 Socket
Pin Signal Pin Signal
1
External Trigger + 6 External Trigger -
2
Integrate Enabled + 7 Integrate Enabled -
3
Trigger Ready + 8 Trigger Ready -
4
Not Connected 9 Not Connected
5
Not Connected
Table 2-2: Pin Assignments for the 9-Pin Micro-D Plug
*
The camera housing is not grounded and is isolated from the circuit boards inside of
the camera.
1
5
6
9
1
3
5
2
4
6