User`s manual

Line Acquisition Modes
Basler sprint Mono Cameras 65
If you choose to use 2 encoder steps to move the image 10 µm, you will require a 1 : 17.86
magnification and at this magnification, the field of view of each sensor line will be 731.55 mm. If
you choose to use 3 encoder steps to move the image 10 µm, you will require a magnification of
1 : 27.03 and at this magnification, the field of view of each sensor line will be 1102.92 mm. Since
our conveyor is 850 mm wide and since it is usually more acceptable to have a field of view slightly
larger than the conveyor, assume that we choose option 2.
Step 4 - Select an appropriate lens and determine the mounting distance for your camera. You can
contact Basler technical support if you need help with this procedure.
Step 5 - Make sure that the line acquisition mode is set correctly. In this case it would be set to
"delayed line summing (line A delayed". This setting is required because the image of the
object will pass line A first.
Step 6 - Capture images