User`s manual

Line Acquisition Modes
64 Basler sprint Mono Cameras
movement results. And we must also consider that a change in magnification will result in a change
in the amount of conveyor width that is viewed by each sensor line.
The calculations below look at the outcomes of our two options:
Option 1
Calculate the conveyor movement that will generate 2 encoder steps:
2 steps x 0.09 mm/step = 0.18 mm
Calculate the magnification needed to make 0.18 mm of conveyor movement result in 10 µm
movement of the image:
β = 1 : 17.86
Calculate the width of conveyor that will be viewed by each sensor line at this magnification:
40.96 mm x 17.86 = 731.55 mm
Option 2
Calculate the conveyor movement that will generate 3 encoder steps:
3 steps x 0.09 mm/step = 0.27 mm
Calculate the magnification needed to make 0.27 mm of conveyor movement result in 10 µm
movement of the image:
β = 1 : 27.03
Calculate the width of conveyor that will be viewed by each sensor line at this magnification:
40.96 mm x 27.03 = 1102.92 mm
10 µm
0.18 mm
----------------------- 0.056=
1
0.056
--------------- 17.86=
10 µm
0.27 mm
----------------------- 0.037=
1
0.037
--------------- 27.03=