User`s manual

Line Acquisition Modes
56 Basler sprint Mono Cameras
Setting the Camera for Time Delayed Line Summing Acquisition Mode
You can enable the time delayed line summing acquisition mode by using the Camera Configuration
Tool Plus (CCT+) or by using binary write commands from within your own application to set the
camera’s control and status registers (CSRs).
With the CCT+
With the CCT+ (see Section 7.1 on page 156), use the Line Acquisition Mode parameter in the
Output Mode parameters group to set the line acquisition mode to Time Delayed Line Summing -
Line A Delayed or to Time Delayed Line Summing - Line B Delayed as desired.
By Setting CSRs
To enable the time delayed line summing acquisition mode, write the appropriate value to the Mode
field of the Line Acquisition Mode CSR (see page 167).
Section 7.2.2 on page 164 explains CSRs and Section 7.3.1 on page 197 explains using read/write
commands.