User`s manual

Physical Interface
28 Basler sprint Mono Cameras
2.3 Connector Types
2.3.1 26-pin Connectors
Each 26-pin connector on the back of the camera is a female, 0.050 inch MDR connector as called
for in the Camera Link specification.
2.3.2 6-pin Connector
The 6-pin connector on the camera is a Hirose micro-miniature locking receptacle (part number
HR10A-7R-6PB) or the equivalent.
The recommended mating connector is the Hirose micro-miniature locking plug (part number
HR10A-7P-6S). A plug of this type should be used to terminate the cable on the power supply for
the camera.
A power supply that has an output cable terminated with the correct connector is available from
Basler. Contact your Basler sales representative for more information.