User`s manual

Configuring the Camera
184 Basler sprint Mono Cameras
Lookup Table Index CSR
Register Base Address: 0x4108
Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read only
Description: The integer value in this field indicates the status of this control and status register:
0x00 = The register is not available
0x01 = The register is available and all related settings are OK
0x80 = A value in the register is set out of range
Field Name: Lookup Table Index Offset: 0x0001 Size: 2 Bytes Type: Read/Write
Description: Writing an integer to this field selects an index in the lookup table.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the lookup table index
Byte 1 = High byte of the lookup table index
See Section 6.6 on page 141 for more information about the lookup table feature.
Field Name: Min Offset: 0x0003 Size: 2 Bytes Type: Read only
Description: Minimum allowed integer value for the lookup table index.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the min value
Byte 1 = High byte of the min value
Field Name: Max Offset: 0x0005 Size: 2 Bytes Type: Read only
Description: Maximum allowed integer value for the lookup table index.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the max value
Byte 1 = High byte of the max value
Field Name: Increment Offset: 0x0007 Size: 2 Bytes Type: Read only
Description: An integer value indicating the increment for the lookup table index.
The 2 bytes in this field are interpreted as follows:
Byte 1 = Low byte of the increment
Byte 1 = High byte of the increment