User`s manual

Configuring the Camera
180 Basler sprint Mono Cameras
Line Stamp Mode CSR
Register Base Address: 0x2B00
Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read only
Description: The integer value in this field indicates the status of this control and status register:
0x00 = The register is not available
0x01 = The register is available and all related settings are OK
0x80 = A value in the register is set out of range
Field Name: Mode Offset: 0x0001 Size: 1 Byte Type: Read/Write
Description: Writing an integer to this field sets the line stamp mode:
0x00 = Line stamp off
0x01 = Line stamp on
See Section 6.5 on page 136 for more information about the line stamp feature.