User`s manual

Configuring the Camera

Basler sprint Mono Cameras 179

Test Image Mode CSR

Field Name: Register Status Offset: 0x0000 Size: 1 Byte Type: Read only

Description: The integer value in this field indicates the status of this control and status register:

0x00 = The register is not available

0x01 = The register is available and all related settings are OK

0x80 = A value in the register is set out of range

Field Name: Mode Offset: 0x0001 Size: 1 Byte Type: Read/Write

Description: Writing an integer to this field sets the test image mode:

0x00 = Test images disabled

0x01 = Test image 1 enabled (fixed gray gradient)

0x02 = Test image 2 enabled (moving gray gradient)

0x03 = Test image 3 enabled (uniform black)

0x04 = Test image 4 enabled (uniform gray)

See Section 6.4 on page 132 for more information about the test image feature.