User`s manual

Configuring the Camera
156 Basler sprint Mono Cameras
7.1 Configuring the Camera with the
Camera Configuration Tool Plus (CCT+)
The Camera Configuration Tool Plus (CCT+) is a Windows™ based program used to easily change
the camera’s parameter settings. The CCT+ is especially useful during initial camera testing and
the camera design in process.
The CCT+ communicates via the RS-644 serial connection that is integrated into the Camera Link
interface between the frame grabber and the camera. The tool automatically generates the binary
programming commands that are described in Section 7.2 on page 157.
The Installation and Setup Guide for Camera Link Cameras includes detailed information about
installing the CCT+ and includes instructions that describe how to use the CCT+ to change the
camera’s parameters. The guide is available in the downloads section of the Basler website:
www.baslerweb.com.
Note
In demo mode, the CCT+ does not cover the full fuctionality of the camera. We
therefore recommend not to use the CCT+ in demo mode.