User`s manual

Features
154 Basler sprint Mono Cameras
6.12.5 Uploading Configuration Set Files to Your
Camera
Once you have downloaded user configuration set files to your PC as described on the previous
page, you can upload the files from your PC to a camera.
Using the download function together with the upload function is useful if you want to transfer a user
set file from one camera to another camera of the same type.
You can upload a user set file by using the Camera Configuration Tool Plus (CCT+) or by using
binary read/write commands from within your own application to set the camera’s control and status
registers (CSRs).
Note that when you upload a user set file to your camera, you will overwrite any existing values in
the camera’s user set file of the same name.
With the CCT+
With the CCT+ (see Section 7.1 on page 156), you use the Upload button in the Configuration Set
Files parameters group to upload a user set file. When you click the button, the CCT+ will open a
window that lets you navigate to your PC and select a file.
By Setting CSRs
You can upload a user set file by writing values to the configuration set bulk data CSR. Section 7.2.3
on page 188 explains the bulk data CSRs and Section 7.2.3.3 on page 191 explains how to use the
CSRs to upload a file. Section 7.3.1 on page 197 explains using read/write commands.
Note
The factory configuration set file can be downloaded from the camera to the
PC. The factory configuration set file can’t be uploaded from the PC to the
camera because the factory configuration set file in the camera is protected
and can’t be overwritten.