User`s manual

Features
Basler sprint Mono Cameras 137
If the line stamp feature is used together with the AOI feature (see Section 6.2 on page 118), the
stamp pixels are transmitted immediately after the last pixel in the AOI as shown in Figure 48. The
figure illustrates what you would see if the AOI was set for a starting pixel of 33 and a length in pixels
of 256. The line valid and data valid signals will be high while the pixels in the AOI and the stamp
pixels are transmitted.
Fig. 48: Stamp Pixels with 2 Tap Video Data Output, Edge or Level Controlled Exposure, and an AOI