User`s manual

Features
Basler sprint Mono Cameras 131
6.3.6 Uploading a Shading Values File to Your Camera
Once you have downloaded a user shading values file to your PC as described on the previous
page, you can upload the file from your PC to a camera.
Using the download function together with the upload function is useful if you want to transfer a user
shading values file from one camera to another camera of the same type.
You can upload a user shading values file by using the Camera Configuration Tool Plus (CCT+) or
by using binary read/write commands from within your own application to set the camera’s control
and status registers (CSRs).
Note that when you upload a user shading values file to your camera, you will overwrite any existing
values in the camera’s user shading values file.
With the CCT+
With the CCT+ (see Section 7.1 on page 156), you use the Upload button in the Shading Files
parameters group to upload a user shading values file. When you click the button, the CCT+ will
open a window that lets you navigate to your PC and select a file.
By Setting CSRs
You can upload a user shading values files by writing values to the shading values bulk data CSR.
Section 7.2.3 on page 188 explains the bulk data CSRs and Section 7.2.3.3 on page 191 explains
how to use the CSRs to upload a file. Section 7.3.1 on page 197 explains using read/write
commands.
Note
The factory shading values file can be downloaded from the camera to the PC.
The factory shading values file can’t be uploaded from the PC to the camera
because the factory shading values file in the camera is protected and can’t
be overwritten.