User`s manual

Features
120 Basler sprint Mono Cameras
6.2.1 Setting the AOI
You can set the AOI with the Camera Configuration Tool Plus (CCT+) or by using binary write
commands from within your own application to set the camera’s control and status registers
(CSRs).
With the CCT+
With the CCT+ (see Section 7.1 on page 156), you use the AOI Starting Pixel parameter and the
AOI Length parameter in the AOI parameters group to set the AOI.
By Setting CSRs
You set the AOI starting pixel by writing a value to the Starting Pixel field of the AOI Starting Pixel
CSR (see page 176).
You set the AOI length by writing a value to the Length field of the AOI Length CSR (see page 177).
See Section 7.2.2 on page 164 for an explanation of CSRs and Section 7.3.1 on page 197 for an
explanation of using read/write commands.