User`s manual

Specifications, Requirements, and Precautions

Basler sprint Mono Cameras 1

1 Specifications, Requirements,

and Precautions

This section lists the camera models covered by the manual. It provides the general specifications

for each model and outlines the basic requirements for using the cameras.

This section also includes specific precautions that you should keep in mind when using the

cameras. We strongly recommend that you read and follow the precautions.

1.1 Document Applicability

This User’s Manual applies to sprint mono cameras with a camera version ID number of 04.

Cameras with a lower or a higher ID number may have fewer features or have more features than

described in this manual. Features on cameras with a lower or a higher ID number may not operate

exactly as described in this manual.

An easy way to see the camera version

ID number for a sprint camera is by using

the CCT+. To see the camera version ID

number:

1. Double click the CCT+ icon on your

desktop or click Start > All Programs

> Basler Vision Technologies > CCT+

> CCT+. The CCT+ window will open

and the software will connect to your

camera.

2. Scroll down until you find the

“Camera Information” group heading.

If there is a plus sign beside the

Camera Information group heading,

click on the plus sign to show the list

of parameters in the group.

3. Find the parameter called “Camera

Version.” As shown in Figure 1-1, the

last two numbers of this parameter

are the camera version ID number.

You can also access the camera version ID number by using binary commands to read the Camera

Version Inquiry register. (See Section 7.2.1 on page 158 for an explanation of inquiry registers and

Section 7.3 on page 196 for information on using binary commands.)

This is

the

camera

version

Number

Fig. 1: CCT+ Window