User`s manual

Introduction
Basler IP Camera 3
1.3 Overview
 RJ-45 Network / PoE - Provides a 10/100 Ethernet connection and can be used to connect
Power over Ethernet (IEEE 802.3af) to the camera.
 Terminal Connector - Provides connections for a direct power input to the camera,
connections for the camera’s input and output lines, and connections for a standard RS-232
serial port that can be used to control an external device. See Section 5 on page 65 for
detailed information about the terminal connector.
 DC Iris Control - Provides a connection for a DC auto iris.
 CS-mount Lens Adapter - Provides a point to mount a CS-mount lens or a C-mount lens on
the camera (a 5 mm extension tube is required with a C-mount lens).
Terminal
Connector
RJ-45
Network / PoE
DC Iris
Control
CS-mount
Lens Adapter
1/4’’
Standard
Tripod
Mount
M3 Mounting Holes
(8 total)
Fig. 1: Camera Connections