Manualshelf

User`s manual

ManualsBrandsBasler Vision Technologies ManualsHome building and DecorBIP-1000c
61626364656667686970
The Terminal Connector
Basler IP Camera 65
5 The Terminal Connector
The 6-pin terminal connector on the back of the camera can be used to:
provide power to the camera (when PoE is not used).
access the camera’s input line.
access the camera’s output line.
access the camera’s RS-232 connection.
The terminal connector on the camera is a Phoenix header (part number 1881480).
The recommended mating connector is a 6-pin Phoenix plug (part number 1881367). A Phoenix
plug of this type is included with each camera.
NOTICE
Do not apply AC voltages or voltages out of specification to the camera.
1. Apply only DC voltages. Applying AC voltages can seriously damage the camera.
2. Make sure that the voltages are within the limits specified in Table 3 on page 66. Applying
voltages outside of the specifications can seriously damage the camera.