User`s manual

Configuring the Camera
14 Basler IP Camera
Gain Limit - When automatic gain control is enabled, (see Exposure Mode above) the Gain Limit
parameter sets the maximum amount of gain that the automatic gain control can use. If the gain
limit is set to "off", there will be no limit for the automatic gain control.
Note that if the Anti-Flicker feature is enabled, the Gain Limit parameter setting must be 6dB or
greater.
Gain - When automatic gain control is disabled (see Exposure Mode above), the Gain parameter
sets the gain for the captured images. Gain refers to the amount of amplification that is applied to
the pixel values in each captured image. A higher setting means more amplification.
Note that if automatic gain control is enabled, the Gain parameter will be read only and will indicate
the current gain value as set by the automatic control.