User`s manual

Configuring the Camera
BASLER A302f 4-11
DRAFT
Shading Correction Advanced Feature Register
The shading correction advanced feature register can be used to control the operation of the
camera’s shading correction feature (see Section 3.9).
Offset Name Field Bit Description
0100h SHADING_CTRL
(Read/Write)
Presence_Inq [0] Presence of this feature
0: N/A 1:Available
WriteEna [1] 0: Disabled
1: Enables write access to shading data
memory
Completed [2] 0: Less bytes written than expected
1: Correct number of expected bytes writ-
ten or more bytes written than expected
Error [3] 0: No error
1: Error occurred
--- [4..6] Reserved
Test [7] 0: Normal camera operation
1: Camera outputs the current shading
data as an image
ShadingMode [8..15] 0: Shading Correction disabled
1: Shading enabled (factor 1:3)
2: Shading enabled (factor 1:5)
[16..31] Reserved
0104h MODE_INQUIRY
(Read Only)
Mode 1 [0] Shading with factor 1:3 available
Mode 2 [1] Shading with factor 1:5 available
--- [2..31] Reserved
0108h IMAGE_POSITION
(Read Only)
Left [0..15] AOI - Left position of the image
Top [16..31] AOI - Top position of the image
010Ch IMAGE_SIZE
(Read Only)
Width [0..15] AOI - Width of the image
Height [16..31] AOI - Height of the image
0110h
...
018Fh
SHADING_DATA
(Write Only)
ShadingData [0..31] A maximum of 128 Bytes of shading data
can be written in one step.